The Outdoor Paws USB Rechargeable LED Ring Dog Collar is equipped with bright, energy-efficient LED lights that provide 360-degree illumination. Ensuring your dog is safe and seen. The collar is lightweight and adjustable from 30 – 65cm – cut to size.
Description
With three light settings in blue – fast flashing, flashing and constant light. Cycle through the on/off button to select the modes. Fully charged within 2 hours or less and can be used for approximately 6 to 8 hours with flashing light and 2 to 3 hours with continuous light. How to resize your collar Collar resizing should only be carried out by an adult.- 1. Unscrew either one of the screws and remove the clear tube from the hard plastic base.
- 2. Place the collar around your pet’s neck and measure how much tubing you will need to cut, ensuring you can easily fit 2 fingers between the collar and your pet. Use a marker pen to mark the line to be cut. Carry out a test fit before cutting by holding the collar around your pet’s neck and lining up your marked line to the raised ridge on the hard plastic base.
- 3. Take the collar off your pet’s neck and cut the clear tube on your marked line with sharp scissors.
- 4. Reinsert the clear tube into the plastic base and push in for a tight fit, check the collar fits comfortably on your pet.
- 1. Pull back the black rubber USB port cover on the back of the hard plastic base.
- 2. Take the USB cable and insert the smaller end into the port on the collar.
- 3. Insert the larger end of the USB cable into a computer USB port or compatible 5V 1A charging base.
- 4. IMPORTANT: Only use the included cable to recharge your LED Ring Collar and plug into a computer or a 5V 1A adaptor. Do not use a fast charging adaptor that has over 5V output .
- 5. Once connected to power, you’ll see a red charging indicator light.
- 6. Once fully charged the red indicator light will go out.
- 1. Fast flashing.
- 2. Slow flashing.
- 3. Constant light.
- 4. OFF.
